Uses of the Crodeon API
A Weather Station with API
4 Things to look for in a temperature sensor with API
A weather station with water level sensor for a marina or harbour
Leaf wetness sensor installation and maintenance
How VITO makes Flanders waterproof
Why we manufacture in Belgium
Rénovation du pont d'Haringvliet : une station météo pour les chantiers
What is the ideal server room temperature?
Easy environmental monitoring for a server room
Steen Vastgoed and Reporter, a rock-steady duo!
FKT and Reporter: match made in cold room
A weather station with multiple sensors
A power failure detector for your construction site
Combined pressure and temperature measurement
Using a weather station on your construction site
Roof climate research
Sustainable irrigation with a water usage monitoring device
Green roof monitoring
What is the ideal temperature for a cold room?
How to install a weather station
Industrial odour monitoring with a weather station
How groundwater level affects cracks and tears in buildings
4G and solar-powered IoT device: Revolutionizing remote monitoring with Reporter
Housing requirements for a poultry farm: the complete guide
Monitoring heat treatment in cargo containers
How to prevent and detect a barn fire in a pig pen
Professionally farming mealworms: how to create an ideal growing environment?
Safeguarding poultry from heat stress: how to recognize and prevent it
Sustainable blueberry farming: a case study
Connecting a limit switch to the cloud
A dew point sensor for remote monitoring
The ultimate guide to potato storage monitoring
How KuNa Fish makes fish temperature monitoring a piece of cake
CO2 poisoning in swine and other kinds of pig suffocation
Wind monitoring and wind speed measurement
Halal HACCP: temperature monitoring in a factory
What is dew point?
Why you should monitor relative humidity in curing concrete
Monitoring archive temperature and relative humidity
Weather monitoring: measuring wind at a festival site
Measuring dew point temperature and relative humidity for glue at construction sites
A professional remote monitoring rain gauge with digital measurements
How to tackle the 7 principles of HACCP in restaurants and food companies with simple technology
Sensors
General Use & Installation
Capteur de niveau d'eau pour mesurer le niveau d'eau dans un récipient ou un puits
Effortless groundwater level monitoring
How is Reporter powered?
How Crodeon helps research companies save time with remote monitoring and data logging
When getting started with Reporter, we focus on the ease of installation of sensors. Not only physically, but also on the Dashboard. On the Crodeon Dashboard you have the possibility to:
Manage your groups
Add or remove members and their user rights
Add or transfer Reporters
Give your sensors and sensor channels their own name
Set an alarm on each sensor channel
Hide or show the sensor channels you want to see live on your Dashboard
Add or remove new sensor templates based on their transformations
If you have the "Owner" rights of a group, you can manage the Reporters in this group. You can add a new Reporter by following the Claim your Reporter flow or transfer a Reporter by following these steps.
Go the general configure menu of your Reporter.
Click on the three dots right of the “Configure Reporter” header.
Select "Transfer Reporter" and choose or create your group.
Note that you can only transfer Reporters between groups you own.
Name your sensors
You have the possibility to give each sensor and sensor channel their unique name. This is done by clicking on the three dots next to the sensor name and sensor channel name.
Some of our sensors have multiple measurements, like our outdoor weather sensor. If for example the wet bulb and dew point aren't relevant for you, you can hide these channels on your "live data" view. So, you can focus on what's important to you.
To hide or unhide a channel, go to that sensor channel on the configure page of your Reporter. Click on the three dots and select "set visibility". You can now enable or disable this sensor channel.
Add a sensor template
If you have to connect a third-party sensor to one of our adapters, you have the possibility to create a sensor template to transform the raw measurements into meaningful sensor data. The Crodeon Team will advise you when this is necessary and how to do this. For more questions on how our adapters work and which different kind of sensors you can connect, please contact the Crodeon sales team at info@crodeon.com or visit our learning center/connection diagrams.
Co-fondateur et CEO de Crodeon, Jonathan sait à quel point les capteurs peuvent changer notre quotidien. Au cours de ces 7 dernières années, il a rencontré des clients de nombreux secteurs, de l'agriculture à l'industrie. Jonathan connaît les tenants et les aboutissants de l'Internet des Objets et ce qui tracasse nos clients.
A weather station with API typically consists of sensors that measure various meteorological parameters such as temperature, humidity, wind speed and direction, and precipitation. Apart from the sensors it also...
A weather station with API typically consists of sensors that measure various meteorological parameters such as temperature, humidity, wind speed and direction, and precipitation. Apart from the sensors it also...
There are many different reasons why you would want to use a temperature sensor with API. From automating processes to gathering all your data in one place or because you...
There are many different reasons why you would want to use a temperature sensor with API. From automating processes to gathering all your data in one place or because you...
